Several installation methods of throat clamp


Published:

2022-11-29

Alignment installation method: The hose clamp shall be installed according to the torque value recommended by the manufacturer. Incorrect installation method 1: although the hose clamp can also be twisted to a proper torque value...

Alignment installation method: The hose clamp shall be installed according to the torque value recommended by the manufacturer.
Incorrect installation method 1: although the hose clamp can also be twisted to a proper torque value, the expansion joint operates under pressure, which will cause the hose clamp to fall off from the edge of the hose and eventually lead to hose leakage.
Incorrect installation mode 2: although the hose clamp can also be twisted to a proper torque value, hose expansion and local vibration will force the hose clamp to move, resulting in hose leakage.
Incorrect installation mode 3: although the hose clamp can also be tightened, the expansion, contraction and local vibration of the hose will make the hose wall subject to cutting force, and will also damage the strength of the hose. Constant vibration of the hose clamp will eventually cause the hose to leak.
The specification of stainless steel throat clamp is new, and the bandwidth is changed; The screws and covers are made of high-quality carbon steel, with the minimum specification of 10-16mm and the maximum specification of 65-89mm. The series specifications are as follows:
Specification (locking range) Thread width (mm) Torque (N.M)
10-16mm 10mm 5.5
13-19mm 10mm 6.0
16-25mm 10mm 6.0
18-29mm 10mm 6.0
18-32mm 10mm 6.5
21-38mm 10mm 6.5
21-44mm 10mm 6.5
27-51mm 10mm 6.0
33-57mm 10mm 5.5
40-64mm 10mm 5.5
44-67mm 10mm 5.5
46-70mm 10mm 5.5
52-76mm 10mm 5.5
60-83mm 10mm 5.5
65-89mm 10mm 5.5